Toccata and Fugue in D minor, BWV 565

I solved this on December 18, 2024, after spending nearly a year searching for it. Since it is an organ composition [1], it was harder to find because it’s an instrumental piece. I was finally able to locate it after hearing it in the 90s TV series Sabrina the Teenage Witch. I managed to play the piece using an app, but it took two tries to get the correct version. It was well worth the time spent, as the piece sounds lovely [2]. I enjoyed it a lot through my Bluetooth earbuds, Baseus BowieWM02 [3].

I noticed that this piece was often used in classic horror stories on TV when I was little, such as in the Dracula story.

Until then, enjoy listening to beautiful instrumental music with your precious Bluetooth earbuds!

References:

[1] https://en.m.wikipedia.org/wiki/Toccata_and_Fugue_in_D_minor,_BWV_565

[2] The favorite version that I love to listen https://youtu.be/ho9rZjlsyYY?si=qTyY9024-hKOWUQ4

[3] My Bluetooth earbuds, Baseus BowieWM02 https://serinurulbeauty.blogspot.com/2024/05/my-review-on-baseus-bowie-wm02.html

Dance of the Sugar Plum Fairy

I was able to recall this instrumental piece piano play after watching the film Red One on December 17, 2024 [1]. As soon as I heard the piece around 1:29:26 onwards in the film [2], my brain immediately recognized it as "The Nutcracker". After some searching, I finally found the version I liked [3]. It sounds even better when I listen with my Bluetooth earbuds, the Baseus Bowie WM02 [4]. This piece is also associated with classic horror TV stories.

Until then, enjoy listening to this beautiful instrumental piece!

References:

[1] https://en.m.wikipedia.org/wiki/Red_One_(film)

[2] https://vt.tiktok.com/ZS6Y4MdYn/

[3] https://youtu.be/sdduPpnqre4?si=sNJiiANOF4wjXOKQ

[4] https://serinurulbeauty.blogspot.com/2024/05/my-review-on-baseus-bowie-wm02.html

Compiling errors and solutions from Module 8 and 9 of Microprocessor class

This was taken at noon on 19 December 2024 while I was compiling the errors and solutions from the assembly code that students encountered during the Microprocessor class the day before.

This serves as a diagnostic report after allowing the students to use their own laptops to compile the assembly code from Modules 8 and 9. I had provided the necessary steps to the students in class and encouraged them to work on it within their respective groups. Initially, I was instructed to demonstrate the process in class, but I felt it would be more beneficial for the students to try it themselves—and this decision proved to be correct.

From the diagnostic report, it became clear that 98% of the students made the same basic mistake: failing to save the project file in a newly created folder. Despite this, 9 groups were able to successfully resolve their errors, 1 group is still struggling, and another 6 groups have yet to provide any updates on their progress. Failure to submit updates will, unfortunately, result in no marks for the class exercise.

Preparing this kind of report is tedious and time-consuming. However, if it’s not done promptly after the class, it’s easy to forget the details by the following week. That said, documenting these errors and solutions is a great practice for self-improvement and professional development. Of course, this approach may not work for everyone, as individuals have their own methods of handling such tasks.

Until next time, have fun creating diagnostic reports after each session!

Reference:

[1] Tested assembly code from slides Module 8 of Microprocessor class https://serinurulbeauty.blogspot.com/2024/12/tested-assembly-code-from-slides-in.html

Tested assembly code from slides in Module 8 of Microprocessor class

This was taken at noon on 18 December 2024, while I was testing assembly code from the slides in Module 8 of the Microprocessor class.

Despite having taught the class last 13 November 2024 before their Test 1, I still encountered students last 9 December 2024 asking why their code wouldn't compile in the Keil uVision software. This demonstrates that many of them haven't even attempted to compile the assembly codes from the earlier notes after being taught.

I was asked to compile the assembly codes because the lecturer wanted me to demonstrate to the students how the code is compiled. You can see that I test the assembly code page by page. This approach saves time and avoids creating multiple project files. I can also comment on the code line by line as needed to show examples incrementally. Alternatively, one could create separate projects for each page—this is entirely up to the individual testing the code.

This is essentially part of my consultation work, which happens behind the scenes. Often, people perceive that I do "nothing" because I’m not working on the front-end tasks. Many assume this work is simple and easy for others to do, especially with daily practice. However, I recall when someone took over my role in 2015 and complained about the amount of work and hassle involved—even though they were confident initially. It’s worth noting that even this person, a male, found the workload challenging. It seems my tasks only look easy to others.

Until then, enjoy testing assembly codes in Keil uVision software!

Using 5 meter power extension to charged up laptop during class

This is taken last 9 December 2024. Where I used my power extension that have 5 meter cord length to charged up my laptop. 

This is during 2 hours class of microprocessor subject. Need to use laptop to take notes and check up notes during class in session. Now already started programming session. So, it is best to try simulate the code for faster verification during class in session.

Until then, have fun in using suitable cord length to your power extension for your usage.

USB and USB-C port for charging in Super Nice Bus Express

This is taken on the morning of 17 August 2024. Where I take Super Nice Bus Express to go KL for work travel.

I was impressed with the USB and USB-C ports available at the back of the bus seat. Very convenient for me to charged my devices. Just need to remember to bring charging cable.

I wait at bus stop in Shell Sri Putri. As the Super Nice office is locked. Fortunately by 9.35 am the Super Nice Sri Putri personnel call me. Asking if I know where to wait for the bus. As the bus just leave Bus Terminal Tun Aminah. 

Thankfully I am able to board the bus smoothly from the bus stop. And arrived safely in TBS.
Learn new way to go to KL other than Larkin Sentral.
Until then, have fun exploring new way to travel to KL.

My review on my heat proof baking pad.

This is taken last 12 August 2019. Before I start to cook my steamed rice.

Able to withstand heat up to 220 degree.

Size 40 cm x 30 cm.
Here can see I folded my heat proof baking pad to fit it into my 2.5 liter pressure cooker. I used the baking pad last 15 November 2019 to line under used ceramic bowl. In order to avoid any scratch to my precious non stick inner pot.

 The cooked rice with black glutinous rice.

Until then, have fun in cooking steamed rice.

Measuring part of head skin of my volunteer after consistent usage of my self made herbal hair tonic.

I used my skin condition measurer since last 11 March 2019.

Condition: while subject 1 still wearing hair tonic B.

Parted hair part:

 Top part, middle section.

Measurement of skin condition after he wash his hair with shampoo from hair tonic B in the morning.

Parted hair part.

Top part, middle section.

After wash from hair tonic A.2 in the evening only with water.

Parted hair part:

 Top part, middle section.

It is quite a challenging experiment when the volunteered subject 1 did not follow my SOP (Standard Operating Procedure).

Which is to clean hair from hair tonic using mild shampoo.

It hinder me from getting correct measurement from my data collection.

Still, I have to make do since it is done voluntarily by subject 1.

As I can only get weekend data from myself due to my condition wearing hijab in daily basis until my daily work is done.

Quite a project that I have done last time. Nowadays, hardly have time for such. Well, time well spend.

Until then, have fun in taking data from your volunteered subject of experiment.

My verdict after using my 26 cm/10 inch LED ring light.

This is taken last December 2022. Where I  am experimenting on LED light for photography. 

Worth the investment. As I am able to take good pictures despite the room lighting is poor using only my Samsung J7 Prime phone.
The light from the 26 cm LED ring light disperse evenly close to the object. Basically I can put my phone with the light within less than 6 cm from object. Enable me to get close up picture shown below.

Not easily achieve when using my 8 cm LED ring light. As I need to put both of light and my camera further in order for the light to disperse evenly to get the picture that I wanted. 

For this, I use my dual Britney Spears perfume as the object.

Until then, have fun in using good LED light.

My 17 gm of organic mulberry harvest

This is taken in the morning of 19 October 2020. Where I am able to harvest a handful of mulberry fruits that weigh 17 gm.

The weighted mulberry fruits on digital scale.

The look of the mulbery fruits before harvest.

The right side.

The left side.

It does feel nice to be able to munch on freshly plucked mulberry fruit. No worries since it is free from pesticide.

My review in traveling with Mayang Sari bus express

This is taken on the noon of 10 September 2023. Where I book bus ticket Mayang Sari bus express from Terminal Bersepadu Selatan (TBS) to Larkin Sentral. 1 pm of one way trip. What nice about this Mayang Sari bus express is the availability of 2 unit of usb port for charging in the middle of the joined seat.

The look of 2 usb ports in the middle of the joined seat.

This is a bonus for me. As I am able to save the usage of my power bank and use this usb port instead to charged up my phone on the bus. Just need to remember to bring usb cable. 

Until then, have a safe time charging while traveling. 

Discussion on final year project after PCB short course

This is taken on the noon of 19 November 2024. After the PCB short course ends. In Vecad lab pantry. Where this student interested to do his final year project related on semiconductor. As it is the industry that offer higher salary pay at the moment. 

It is quite an extensive discussion. As this student is Mechatronic student. But there is still a way to achieve it. Since normally Electronics engineering students that able to get works in semiconductor industry. Especially those who do related final year project with semiconductor industry. 

Until then, have fun in deciding your final year project. 

PCB short course for capstone students

This is taken on the noon of 19 November 2024. Where I have to assist on PCB short course for capstone students. 

Total of 23 students. The short course was held in the smart classroom level 2 in Block P04.

This is the briefing in the PCB lab.

They are final year students. The capstone subject is supposed to prepare the students for their final year projects. Especially the one who used hardware. 

Until then, have fun in attending PCB short course in your university. 

The look of kitten to stray cat in lab

This is taken on the noon of 2 December 2024. Where I noticed 3 kittens to this stray cat after my trip to the toilet. By the time I come nearer to take clear picture, 2 of the kittens already run away. Leaving the black ones with its mother.

I used to help feed the stray cat in the lab area. Especially when one of the lecturer who feed the stray cats was on maternity leave. Which I make sure to clean the feeding plate before put on new food for them.

Until then, have fun in feeding the stray cat in your area moderately.

Fresh flowers harvest

This is taken on the morning of 29 November 2024. Where I remembered to harvest the blooming melur jawa@jambak flowers and pink rose flower. To be my room freshener. 

I managed to get 2 stalk of melur jawa@jambak flowers and 1 pink rose flower. The melur jawa@jambak flowers is very fragrant and last longer than the rose flower. The rose flower started to drop off its petals by evening of 1 December 2024.

Until then, have fun enjoying a good fresh flower harvest. 

Weight of Sarawak pineapple 1.3 kg

This is taken on the noon of 21 November 2024. Where I remembered to weigh the ripe Sarawak pineapple before peel it off. It weigh 1.3 kg after taking off its crown. 

Did not managed to take picture after peeling process. As I  was too busy dividing it for others to taste. Then rushing for meeting.

Until then, have fun in sharing your harvest with others. 

My review on Canaan Aniflea Anti Flea Cat Shampoo

Receive it last noon of 15 June 2020. Able to use it to bath Furball that very evening. 

I am really happy to see much reduction of the fleas. Especially on her very back after rinsing her off. And she seems to be less scratching after bath this time. Really feel worth money spend to invest on this new cat fleas shampoo. Despite it is class IV item. I just need to remember to clean up well each time after using it.

Cleaver wound after cut open kelapa pandan (coconut) fruit

This happens in the noon of 22 September 2020. Where I was wounded after using cleaver to cut open kelapa pandan (coconut) fruit. Basically it is advised not to handle cleaver when you are tired. As will easily wounded due to lack of concentration. Quite a lot of blood oozing out since it was during afternoon time.

The look of self made coconut shake. Made from harvested kelapa pandan (coconut) fruits that I planted outside of my house [1].

My usb rechargeable handheld fan

This is taken in the noon of 3 December 2020. Where I manage to get a working unit of usb rechargeable handheld fan.

It only have 1 speed and 1 button switch. Still it works well to be used when in gardening plot and travel.

Good proper and professional place with expert to help with your mental health

This is taken in the morning of 27 December 2020. Where I get up as early as I could to go seek professional help on my mental health.

The look of heart pisang lemak manis (banana)

The look of newly emerged heart to my pisang lemak manis (banana) in the morning of 25 January 2021.

My Beanies instant coffee drink flavor Creamy Caramel

The look of Americano that I made using Beanies instant coffee drink flavor Creamy Caramel.

The look of the unwrapped instant coffee from Beanies in flavor Irish Cream and Creamy Caramel last morning of 18 October 2023.

I prefer Beanies instant coffee drink flavor in flavor Irish Cream more.

Until then, have fun enjoying good instant coffee at home.

My simple breakfast of steamed corn cob

This is taken on the morning of 22 November 2024. Where I am blessed to be able to have a simple breakfast. Consists of steamed corn cob paired with black tea.

It was simple yet fulfilling breakfast. 

This time, I just put 11.7 gm loose black tea in my flask. Then I add 330 ml hot boiled water. Which I then put on the lid to the flask. To leave the black tea to brew inside it with the heat from the water.

As for know, my stomach only able to tolerate black tea, green tea, pu er tea, jasmine tea and oolong tea. But no to the tea sold at restaurants. As it makes me bloating. Basically now I only drink the tea that I self brew and make. Better safe than never. Lesson learned well. For me it is a good thing being observant to my body reaction on what I consume. Since what my body can process is different from others. Live and learn.

Until then, have fun enjoying good steamed corn cob. 

Steamed corn cobs

This is taken on the noon of 21 November 2024. Where I managed to steamed 4 corn cobs before I go for Zohor prayer. Then able to prepare the corn cobs for sale before 3 pm.

The look of pretty in yellow freshly steamed corn cobs. After steamed for 13 minutes. 

The look of cleaned 4 unit corn cobs. Which I add 100 ml water for the steaming process.

The look of bought corn cobs.

Until then, have fun in steaming corn cobs.

Arranging stuff into 1 box for neater placement

This is taken on noon of 29 June 2024. Where I put most of our group stuff inside 1 box in the vecad lab pantry. For faster usage.

The look of the box containing the stuff.

Until then, have fun in arranging your group stuff inside a box.

Harvesting 1 melur jawa@jambak flower

This is taken on the morning of 20 November 2024. Where I managed to harvest 1 unit melur jawa@jambak flower. Which then I give it to 1 female technician that I am close with. She was very happy and also spooked at the same time. As for her, the smells reminded her to the bunga kemboja (frangipani) that often planted near Muslim cemetery. I do explained to her it is totally different flower type.

The one I put in vecad lab pantry still smells good. Even after 2 days it is harvested. 

Until then, enjoy the fragrant of good freshly harvested melur jawa@jambak flower as natural room freshener. 

Weight of 1 of my pisang raja (banana) fruit is 158.4 gm

This is taken on the morning of 20 November 2024. Where I managed to remember to weigh in the pisang raja (banana) fruit. It was from the 4th sisir/sikat (comb/layer). The weight it 158.4 gm. Still heavy.

It was harvested last morning 15 November 2024. I get total of 6 sisir/sikat (comb/layer) pisang raja (banana) fruits from the harvest.

Until then, have fun enjoying good pisang raja (banana) fruits.

Harvesting Sarawak pineapple fruit

This is taken on the afternoon of 5 November 2024. Where I noticed the bottom part of Sarawak pineapple fruit already broken.

The Sarawak pineapple fruit weight 2.188 gm.

Sarawak pineapple fruit already started to ripen by 18 November 2024. Where the outer skin turned orange from dark green.

Until then, have fun in monitoring your planted Sarawak pineapple fruit.